SourceInfi
Couldn't load pickup availability
2-IN-1 Moving Sand Art Multifunctional Bedside Table Lamp
3D Moving Sand Art Picture with LED Light
360° Rotatable Flowing Sand Painting, You can easily convert the Desk lamp between the Moving sand art and the desk lamp by adding or removing the Quicksand.
You can observe the process of sand falling from different angles, the grains of sand are falling slowly, making you feel that the whole world is becoming quieter, breathing slower, and releasing pressure.
Our small desk lamp creates a nice and comforting feeling in the house when spending time with your family as the Moon disgn shade softens the light making it better for protecting your eyes.
Dimming Table Bedside Lamp With Remote Control
Table Lamp with 3 Color Modes, There must be one color which makes you fall for it, and enjoy it with your lovers, family, and friends.
3000K Warm White, Perfect for midnight nursery, meditation, movie nights-in
4500K Natural White, Ideal for romantic meals, watch movie
6500K Cool White, Excellent for reading, working, playing electronics, or family life
You could adjust any brightness you want, baby sleeping on the lowest light, reading book on the medium light, working or playing on the highest light - bright up your whole room.
First, determine whether the size of the bubbles is appropriate. If the size of the bubbles is appropriate, determine the contact between quicksand, liquid and air bubbles.
Too fast:
The air bubbles cannot isolate the quicksand on it, the quicksand is in direct contact with the liquid, and the quicksand flows faster due to gravity.
Too slow:
The quicksand is in complete contact with the air bubbles, there is no gap or the gap is small, and the quicksand is slow
Guidelines for Use
|
|
|
|
|
|---|---|---|---|
Maintenance of Quicksand ArtQuicksand is a natural balance of water, sand, and air. The height of the air layer varies greatly depending on the size of the product. The height is between 0.5cm and 2cm, and the sand will have a better flow rate. The air bubbles are kept at 2-3cm. |
Do I need to add distilled water?Do not use distilled water. Please use Spring Water. Spring water comes out of the ground with minerals but free of things we later add to water. You need a syringe to adjust. Do not inject too much at once, as the water pressure is too high and the glass may break. |
Sand cannot flow down or flow too slowly？When the product is shaken repeatedly, small and dense air bubbles will be generated in the moving sand. Due to the insufficient gravity of the sand, the sand cannot flow down quickly, or even get stuck directly on it. In such a case, you will need to let it sit for a few hours. The foam will slowly get bigger and the sand will slowly start to flow. Please don't shake it too much the next time you spin and make small dense bubbles again |
Sand will fall in seconds. Is it because there is not enough air?You can shake the sand art vigorously to make the quicksand sheet produce a row of fine and dense air bubbles, allowing the sand to flow down from the gaps of the air bubbles to achieve the desired effect. If you don't create a complete row of small bubbles and flow down directly, it may be done in less than 3 minutes. |
Recommendations
1. The large size of the moving sand art painting is made of glass, please use it with care, and do not let children use it alone.
2. When using it for the first time, please put the moving sand art painting on the shelf for at least 30 minutes, and perform the first 360-degree rotation.
3. Before each inversion of the sand art liquid movement, please let the sand stay for a while to better form the scene.
4. Under normal circumstances, there is no need to adjust the gas and water during the movement of the dynamic sand art fluid.
5. There are strict initial standards for the air volume of the moving sand painting. Over time, the air inside may increase and the moisture will evaporate, at which point the water to air ratio may need to be adjusted.
6. The quicksand art liquid movement has a small hole on each side. Find this little hole, stand up the sand tray, let the air come up and the sand sink. Insert the syringe into the rubber and adjust the water and air as needed.
7. The amount of water injected must be the same as the amount of air extracted. Also, please don't do it too many times as it may damage the air tightness of the rubber.
Characteristic
- Product name: 3D Dynamic Sand Art Bedside Table Lamp
- Light Effect: Warm Light, Natural Light, White Light, Multi-level brightness
- Material: Glass (Main part) &Lamp; Acrylic
- Switch: Remote Control
- Voltage: 180-265V
- Size: 11*10 inch
- Note: Syringe and needle are medical equipment and dangerous goods, so we cannot provide them
